Furuno MU-155C - Manual (Page 23)

17
4.4 Choosing Source for Picture-in Picture
Choose the source for the picture-in-picture window as follows:
Note:
The size of the picture-in-picture window can be adjusted on the VIDEO1, 2 and 3
menus. For details, see section 3.2.
1. With the RGB1, RGB2 or DVI display shown, press the [PIP] key.
The PIP selection window appears. Signal names can be changed. For detail, see “3.3.2
Changing the signal name”.
PIP window
2. Press the [▲] or [▼] key to select the VIDEO port desired.
VIDEO can be also selected by pressing the [PIP] key continuously. To turn off the
picture-in-picture window, choose OFF.
3. Press the [◄] or [►] key to close the window.
Note:
The picture-in-picture window can be moved by pressing the arrow keys when a
menu window is erased.
VIDEO1
VIDEO2
VIDEO3
OFF