Using the image position controls, Using the image position controls -34 – FARGO electronic DTC400 User Manual
Page 144
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
5-34
Using the Image Position Controls
Use the Image Position controls to adjust the position of the overall print area to be
precisely centered on a card.
Step Procedure
1
Click on the Vertical and Horizontal adjustment arrows to adjust the Image
Position values.
•
When adjusting these values, keep in mind that cards always remain in the
same position while moving through the Printer, regardless of image
orientation.
•
To illustrate this, the card illustration shown in the Image Position box will flip
and rotate according to the Portrait, Landscape, or Rotate 180 Degrees
selection.
•
The outline around the illustration will always remain in the same Landscape
orientation.
Continued on the next page