Fujitsu Siemens Computers N3510 - Manual (Page 6)

6
L i f e B o o k N S e r i e s N o t e b o o k B I O S
Main Menu -> IDE Settings Submenu – Setting the timing and ATI/ATAPI Device
The IDE Settings submenu of the Main menu allows you
to select a speed for the hard disk drive, which device(s)
to use, and whether to support SMART functions. The following figure shows the IDE Settings submenu.
Figure 4. IDE Settings Submenu
Master : FUJITSU MHT2100AT
rsion : x.xx
te : xx/xx/xx
ea : E000h - FFFFh
sor Password Is : Clear
ssword Is : Clear
Master Password Is :Clear
nformation Is : Clear
CPU
L2 Cache :
Memory
Total : 51
Slot 1 : 25
Slot 2 : 25
A DVD-RAM UJ-831S
te : xx/xx/xx
ings
Speed :
IDE Settings
( ) Standard
( ) Fast PIO
( ) Multiword DMA
( ) Ultra ATA-33
( ) Ultra ATA-66
( ) Ultra ATA-100
HDD Timing
[ ] PRIMARY MASTER DEVICE
[ ] PRIMARY SLAVE DEVICE
[ ] SECONDARY MASTER DEVICE
[ ] SECONDARY SLAVE DEVICE
SELECT DEVICES
S.M.A.R.T. Support Disabled
OK Cancel
Table 4: Fields, Options and Defaults for the IDE Settings Submenu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description
IDE Settings HDD Timing:
■ Standard
■ Fast PIO
■ Multiword DMA
■ Ultra ATA-33
■ Ultra ATA-66
■ Ultra ATA-100
[Ultra ATA-100) Select the timing for the hard drive or select [Stan-
dard] to disable the feature. If the hard drive cannot
support a selected speed, it will choose the next one
available.
(Figure 4)
Select Devices:
■ Primary Master Device
■ Primary Slave Device
■ Secondary Master
Device
■ Secondary Slave Device
[Primary Master Device/
Secondary Master Device] Selects the ATA/ATAPI device(s) to use. (Figure 4)
S.M.A.R.T. Support:
■ Disabled
■ Enabled
[Disabled] Enables or disables the SMART function, which per-
forms such services as self-monitoring and analysis.
(Figure 4)