Fujitsu Siemens Computers N3510 - Manual (Page 8)

8
L i f e B o o k N S e r i e s N o t e b o o k B I O S
ADVANCE MENU – SETTING DEVICE FEATURE CONTROLS
The Advance Menu allows you to:
■ Set the NumLock action.
■ Select between the display panel and an external
CRT display.
■ Enable or disable compensation for your display.
■ Enables or disables the internal controllers.
■ Configure CPU and USB features in your system.
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
(See Navigating Through The Setup Utility on page 2 for
more information.)
The following tables show the names of the menu fields
for the Advance Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
Figure 6. Advance Menu
Table 6: Fields, Options and Defaults for the Advance Menu
Menu Field Options Description
Keyboard
Numlock ■ (Selected)
■ ___ (Unselected)
When selected, enables the Numlock button.
Video Features ___ When selected, opens the Video Features submenu, which allows setting of the display param-
eters, including routing of video signals to different displays.
Internal Device
Configurations ___ When selected, opens the Internal Device Configuration submenu, which allows enabling or
disabling the Modem, LAN, and WLAN Controllers.
CPU Features ___ When selected, opens CPU Features submenu to let you enable or disable XD Bit functionality.
USB Features ___ When selected, opens the USB Features submenu to allow you to enable or disable the legacy
support and SCSI SubClass support (e.g., floppy disk drive, external optical drive).
Miscellaneous
Configurations ___ When selected, opens the Miscellaneous Configurations submenu to allow you to enable or dis-
able the power button, the Wake Up On LAN feature, system beep, and Instant MyMedia.
Event Logging –— When selected, opens the event logging submenu.
Insyde Software SCU Jan 26, 2005 5:05 PM
Main Security Boot Exit
System
Primary Master: HTS424040M9AT00
Secondary Master: MATSHITADVD-RAM UJ-831S
BIOS Version : x.xx
BIOS Date : xx/xx/xx
BIOS Area : E000h - FFFFh
Supervisor Password Is : Clear
User Password Is : Clear
Primary Master Password Is :Clear
Asset Number : None
Owner Information Is : Clear
CPU
Intel(R) Pentium(R) M 740
Speed: 1.73 GHz
L1 Cache: 64 KB
L2 Cache: 2048 KB
Memory
Total: 256 MB
Slot 1: 256 MB DDR2
Slot 2: 0 MB DDR2
Select power-on state for NumLock.
Advance
visor Password Is :
Video Features
Internal Device Configurations
CPU Feature
USB Features
Miscellaneous Configurations
Event Logging
__ Keyboard Numlock