FUJITSU FS-102ATL - Manual (Page 3)

3
KVM Switch/PC/USB - FS-102ATL Series - PC/USB Interface
Select Switch
Press to select the host. PCs with POWER LEDs out can
also be selected if power is being supplied to the switch
device (one or more hosts are ON).
Select LED
Illuminates when this PC is selected
Power LED
Illuminates when the host is ON.
Low Power LED
Switch devices which monitors whether or not the power
voltage is normal. Connect the special AC adapter when
LED light is illuminated.
Reset Switch
Usually, switch is not used. Use the switch when selection
is impossible or keyboard or mouse cannot be operated.
Gently push switch with tip of pointed object.
Pressing switch returns the switch device to its initial state,
and host can be restored without being rebooted.
DIP Switch
Used to set the Hot Key and key layout of the attached
keyboard
HUB port connector
Connector to connect USB devices
Mouse connector
Connects mouse to switch
Keyboard connector
Connects Keyboard to switch
Keyboard/Mouse connector
Connect to Keyboard or Mouse (PS/2) KB/Mouse ports
with special cable
Monitor connector
Connect this to monitor port on the host with the special
cable.
USB connector
Connect this to the USB port on the host with the special
cable
Audio connector IN1
Connects to PC's Line Out jack. (Do not connect to PC's
speaker Out jack).
Audio connector IN2
Connects to PC's Line Out jack. (Do not connect to PC's
speaker Out jack).
Audio connector Out
Connects to speaker
Monitor connector (console)
Connects Monitor
DC 5v connector
AC-powered adapter connector
■ FUNTIONAL DESCRIPTION
1
2