Document Outline

• TABLE OF CONTENTS
• Quick Reference
• CHAPTER1 INTRODUCTION
  • OPTIONS
• CHAPTER2 Setting Up
  • Selecting a good location
  • Unpacking Tthe Printer
    • Checking Options and Supplies
  • Assembling the Printer
    • Installing the Cut Sheet Stand
    • Installing the Ribbon Cartridge
  • Getting Acquainted With Your Printer
  • Connecting the Power Cord
  • Testing the Printer (Offline)
    • Loading Paper for the Self-Test
    • Printing the Self-Test
  • Connecting the Printer to Your Computer
    • Selecting a Parallel Interface Cable
    • Selecting a Serial Interface Cable
    • Selecting a USB Cable
    • Selecting a LAN cable
    • Connecting the Interface Cable
  • Selecting an Emulation
  • Printing a Sample Page (Online)
  • Installing the Printer Driver
• CHAPTER3 Paper handling
  • Selecting Paper
  • Overview of Paper Operations
  • Adjusting for Paper Thickness
  • Using Single Sheets
    • Loading a Single Sheet of Paper
    • Adjusting the left margin
    • USING CONTINUOUS FORMS
  • Using continuous forms
    • Positioning the Paper Stack
    • Loading Continuous Forms
    • Adjusting the left margin
    • Adjusting the TEAR OFF position
    • Unloading Continuous Forms
    • Installing the Tractor Unit
    • Tearing Off Continuous Forms
  • Feeding and positioning paper
    • Line Feed/Form Feed
    • Micro Feed
    • Load Position Adjust
  • Swiching paper types
    • Switching to Single Sheets
    • Switching to Continuous Forms
  • Tips on PAPER HANDLING
    • General Tips
    • Multipart Forms
    • Envelopes
    • Labels
• CHAPTER4 Printing
  • Selecting Print Features
    • Using Commercial Software
    • Using the Control Panel
    • Selecting MENU1 or MENU2
  • Starting or Stopping Printing
    • Starting Printing
    • Stopping Printing
    • Resuming from a Paper-Out
    • Printing the remaining lines on a page
    • Continuing printing after supplying paper
    • Resuming after an Area Over warning
  • Removing Printed Pages
    • Removing Single Sheets
    • Removing Continuous Forms
  • Clearing the print buffer
• CHAPTER5 Using Setup Mode
  • How to use this chapter
  • Entering Setup Mode
  • Overview of Setup Mode
    • Setup Mode Example
    • Points to Remember
  • Printing a List of Selected Options
  • Deciding Which Options to Change
  • Changing MENU1 and MENU2 Options
    • Procedure
    • Resetting MENU1 and MENU2
  • Changing Hardware Options
    • Procedure
  • Changing Print Position Adjustment Options
    • Procedure
  • Changing Configuration Options
    • Procedure
  • Exiting and Saving
    • Procedure
  • Resetting Defaults
    • Resetting Power-On Defaults
    • Resetting Factory Defaults
    • Resetting Factory Defaults in MENU1 and MENU2
  • Using the Diagnostic Functions
    • Printing the Self-Test
    • Procedure
    • Printing Hex Dumps
    • Procedure
    • Checking Vertical Print Alignment (V-ALMNT)
    • Procedure
  • Setup Mode Reference
    • DPL24C PLUS ORGANIZATION
    • Differences in IBM Proprinter XL24E Emulation
    • Differences in Epson ESC/P2 Emulation
  • Online Setup MODE
• CHAPTER6 Maintenaice
  • Cleaning
    • Cleaning and Vacuuming the Printer
    • Cleaning the Platen and Paper Bail Rollers
  • Replacing the Ribbon
    • Replacing the Print Head
• CHAPTER7 Trouble-shooting
  • Print Quality Problems
    • Paper Handling Problems
    • Tips for clearing a jammed sheet from the printer
    • Operating Problems
    • Printer Failures
  • Diagnostic functions
  • Getting Help
• CHAPTER8 Installing options
• APPENDIX A Supplies and options
  • Supplies
  • Option
• APPENDIX B Printer and paper specifications
  • Physical Specifications
  • FUNCTIONAL
  • SPECIFICATIONS
  • PERFORMANCE SPECIFICATIONS
  • PAPER SPECIFICATIONS
    • Print Area
    • Paper Thickness
• APPENDIX C Command sets
  • Command Sets
    • Fujitsu DPL24C PLUS
      • Factory Default Settings
    • IBM Proprinter XL24E Emulation
    • Epson ESC/P2 Emulation
• APPENDIX D Interface Information
  • Parallel interface
  • USB Interface
    • Specification
  • LAN INTERFACE
• APPENDIX E Chatactersets
  • Character Sets 1and 2
  • Italic and Graphics Character Sets
  • National Character Sets (ALL EMULATIONS)
  • National Character Sets (DPL24C PLUS AND IBM XL24E EMULATION))
  • National Character Sets (ESC/P2 EMULATION)
  • National Character Sets and Supported Resident Fonts (ALL EMULATIONS)
• APPENDIX F Resident fonts
• Glossary of terms
• INDEX