Switching to continuous forms, Tips on paper handling, General tips – FUJITSU DL3750+/3850+ User Manual

Page 68: Multipart forms, Tips on paper handling –18

Advertising
background image

PAPER HANDLING

User's Manual

3-18

Switching to Continuous Forms

To switch from single sheets to continuous forms:

1. If a sheet of paper is loaded, remove the paper by turning the platen

knob or pressing and holding down the LF/FF button.

CAUTION

Failure to remove paper may cause a paper jam.

2. Move the paper select lever to the rear to the continuous forms

position.

3. Press the LOAD button. The continuous forms paper advances to the

top-of-form position.

You are now ready to print using continuous forms paper.

General Tips

•

Use high-quality paper. Do not use paper that is wrinkled or curled at

the edges.

•

Do not use paper with staples or metal parts.

•

Do not use paper with unpredictable variations in thickness, such as

paper with partial multilayers, paper with embossed printing, and

labels with the backing sheet exposed.

•

Store paper in a clean, dry environment.

Multipart Forms

•

Avoid using carbon-interleaved single sheets if possible. Printing

tends to become misaligned on the bottom sheet.

•

To ensure smoother feeding of paper-stapled, multipart forms,

raise the cut sheet stand to support the forms.

TIPS ON PAPER HANDLING

Advertising