Freecom Technologies II - Manual (Page 10)

FREECOM Portable II Series
10
GB
1
C
HAPTER
1:
Initial Operation - Brief Description
1. Turn off your computer and all equipment attached to it.
2. Connect the power cable supplied to the designated power connector on the
FREECOM drive. Do not yet plug the power supply into the power outlet.
3. Connect the drive plug of the FREECOM Cable II to the FREECOM device and
connect the other end to your computer.
4. Plug the power supply of the FREECOM drive into the power outlet.
5. To complete the rest of the installation procedure, refer to the manual for
the relevant Cable.
Drive plug
Cable II PCMCIA (type II)
Cable II CardBus (type II)
Cable II USB
(USB port)
Cable II Parallel
(printer port)
Cable II IEEE 1394
(FireWire/i.LINK)
B