Fisher VPC-C6 - Manual (Page 102)

English
96
Procedure to join two video clips
CAUTION
Caution when editing video clips
i When editing video clips, do not move the main switch. If you move the
main switch while editing video clips, not only will the editing not be
properly completed, but the original video clip may also be erased.
i By repeating the clipping and joining procedures, you can create exactly
the video clip you like. Note, however, that as the number or size of the
video clips increases, the card memory may become full, making it
impossible to edit the video clips. In this case, you will need to free some of
the memory on the card either by deleting data that are no longer
necessary (page 81), or by performing the procedure to erase the original
video clip(s) (pages 99, 101).
Display the video clip that will come first.
J
J
Join the video clips. (Press the SET button.)
Select the video clip that you wish to
append (join).
i The two video clips are saved together as a
separate video clip.
i The original video clips are not affected.
(You can also choose to erase the original
video clips when the new clip is saved.)