Fisher VPC-C6 - Manual (Page 131)

125
English
FILE NO. RESET FUNCTION
If a newly formatted card is used, the file name (image number) of the
captured image automatically begins from 0001. If the card is subsequently
reformatted, or if a different reformatted card is used, the file names again
begin from 0001. This is because the file number reset function is set to “ON”,
and consequently it results in more than one card containing images with the
same numbers. By setting the file number reset function to “OFF”, even if the
card is reformatted or the card is replaced with another card, the consecutive
numbering of file names continues from the last number recorded by the
camera.
<File number reset function “ON”>
<File number reset function “OFF”>
File name (image number)
Card A 0001, 0002 ...... 0012, 0013
Card B 0001, 0002 ...... 0012, 0013
File name (image number)
Card A 0001, 0002 ...... 0012, 0013
Card B 0014, 0015 ....... 0025, 0026
Replace card
Replace card