5 menu operating procedure, 6 automatic operation, How automatic operation works – Furuno LS-6100 User Manual

Page 12: Choosing automatic operation

Advertising
background image

5

1.5 Menu

Operating

Procedure

The LS-6100 has three menus: Main menu
(referred to in text as “menu”), System and
Installation. Below is the basic menu
operating procedure.

1. Press the [MENU/ESC] key to open the

menu. Page 1 or Page 2 of the menu
appears depending on the page last
used.

[MENU]: Exit

P

P = Function of PROG key

(1/2)

Note: SHIFT and CLUTTER are
not available in the auto mode.

AUTO MODE

Off

SHIFT

: 0ft

PIC. ADVANCE : 1/1
NOISE LIMIT

: Off

CLUTTER

: Off

SIGNAL LEVEL : Off
A-SCOPE

: Off

HUE

: Day

WHITE LINE

: Off

DEEP GAIN

: Low

Page
no.

Menu, page 1

2. Use ▲ or ▼ to select an item. To view

page 2 of the menu, press ▼ to show
the display below.

[MENU]: Exit

(2/2)

GOTO WPT

Off

WAYPOINT LIST...

TRIP RESET?

GAIN ADJ 200

: +0

GAIN ADJ 50

: +0

DRAFT

: 0.0ft

SYSTEM MENU...

Menu, page 2

3. Press ► to show selected item’s

options window. The example below
shows the options window for AUTO
MODE.

Off

Cruising

Fishing

Auto mode options window

4. Use ▲ or ▼ to choose option or set

numeric value.

5. Press the [MENU/ESC] key to close the

menu, or press ◄ to continue menu
operation.


1.6 Automatic

Operation

How automatic operation works

The automatic function automatically
chooses the proper gain, range scale and
clutter. It works as follows:

•

The range changes automatically to
display the bottom echo on the screen.

•

The gain is automatically adjusted to
display the bottom echo in the darkest
tone.

•

Clutter (on the menu), which suppresses
low-level noise, is automatically adjusted.

Choosing automatic operation

The automatic mode provides two choices
of modes: cruising and fishing.

1. Press the [MENU/ESC] key to open the

menu.

2. Choose AUTO MODE from page 1 of

the menu.

3. Press ► to open the mode options

window.

4. Choose Cruising or Fishing as

appropriate.

“Cruising” is for tracking the bottom;
“Fishing” is for searching fish schools.
Since “Cruising” uses a higher clutter
rejection setting than fishing, it is not
recommended for fish detection - weak
fish echoes may not be displayed.
“Fishing” clearly displays weaker
echoes.

Advertising