FUJITSU PDS5004U - Manual (Page 28)

E-25
Operation
Display the “Screen Orbiter”
adjustment screen and use
or
to select an option.
Use or to switch between
available choices for the
selected option.
Use or for switching.
Use or for switching.
Use or for switching.
Display Code Setting screen
and press
or to select an
option.
Select Manual to set up
Parameter.
Use or for switching.
Use or for switching.
Use or for switching.
Use or for switching.
Display the “Information”
screen.
Function
Sets up screen orbiter.
Specifies input mode of
highest priority.
Selects display number.
Selects input signal.
Specifies and displays type
of input signal directly.
Sets up to display white
over the entire screen.
Sets up Exhibition mode.
Sets up whether horizontal
or vertical installation.
Locks the main unit button.
Displays system operation
status.
Range/Setting
Mode/Time
Off (disabled)
Time (every 1 hr)
Mode (every time mode is
switched)
Moving area
Min.(moves in small range)
Std.(moves in moderate
range)
Max. (moves in wide range)
Off/RGB2/RGB3/Video/
S-video/Comp.video
0 (no setup)/
1/2/3/4
RGB1:
Auto/VGA/WVGA/XGA/
WXGA
RGB2, RGB3:
Auto/VGA/WVGA/480P/
XGA/WXGA/SXGA/
SXGA
+
Auto/Manual
On /Off(disabled)
On (Exhibition mode)/
Off(disabled)
-90 Deg. (counterclockwise)/
Normal/
+90 Deg. (clockwise)
On (Key Lock)/
Off(disabled)
Display only
USING THE FACTORY DEFAULT MENU
• Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory
settings. (See P. E-41.)
FACTORY DEFAULT Menu screen Yes/No selection screen
Option
FACTORY DEFAULT
Function
Restores the adjustment/
setting made in the MENU
to factory settings.
Operation
Select Execute and use or
to select an option.
Range/Setting
Yes/No
Option
(4) Screen Orbiter
(for RGB)
(5) Input Priority
(6) Monitor No.
(7) Direct Setting
(for RGB)
(8) Code Setting
(for RGB2, RGB3)
(9) White Screen
(10) Exhibition Mode
(11) Installation
(12) Key Lock
(13) Information
English