FUJITSU PDS5004U - Manual (Page 37)

E-34
• Setting Display Information (OSD) All modes
You can use this option to select whether to display information other than menus. (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press , one of the available choices appears in the following sequence:
On Off
On : Displays all information.
Off : Displays only menus and error messages.
Press to store.
• Selecting Language (Language) All modes
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press .
The “Language” selection screen will appear.
(2) Press or to select your desired language.
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
(3) Press .
The menu is displayed in the selected language.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
• Displaying the optimum movie pictures (24 Frame Mode)
Can make the optimum display of 24 frames/second signals such as movie pictures.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Displays the optimum movie pictures.
Off : Displays normal pictures.
Press to store.
*Some type of signal can not be selected.
• Setting 3D Y/C Circuit (3D Y/C)
Clear and distinct pictures can be displayed without color blotting.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Set to On normally. Enables the 3D Y/C circuit.
You can make this selection only for NTSC signal.
Off : The 3D Y/C circuit can not be used. Set to Off when the moving pictures look unnatural.
Press to store.
* Can be set only when receiving NTSC signal.
Set to On normally. Set to Off when the moving pictures look unnatural.
FUNCTION
ON SCREEN MENU
"Language" selection screen