FUJITSU PDS5004U - Manual (Page 40)

E-37
* On-screen information disappears if you do not take any action for about 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode, : Comp.video mode, : RGB mode
• Selecting time before DPMS starts (DPMS) All modes
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
(1) Select DPMS and press .
DPMS screen appears.
(2) Press or to select Time.
(3) Each time you press or , one of the available choices appears in the following sequence:
Off: Disables DPMS
Number: Approximate time before DPMS starts. (Unit: minutes)
* The power indicator lamp turns orange while the DPMS is ON.
* The power turns ON automatically when the display receives a signal.
(4) Can specify background color.
Press or to select background color.
Each time you press or , one of the available choices appears in the following sequence:
Black White
Black: Mutes images in Black background.
White: Mutes images in White background.
* Switches approx. 20 seconds after the display stops receiving signals.
(5) Press to store.
* DPMS does not function in RGB1 mode.
DPMS selection screen
English
“Audio Input” selection screen
• Selecting input terminals (Audio Input) All modes
You can use this option to select one of the three available terminals to receive sound from
input equipment.
(1) Select “Audio Input” and press .
The “Audio Input” selection screen will appear.
(2) Press or to select input equipment.
(3) Select a desired input terminal.
Each time you press or , one of the available choices appears in the following sequence:
No audio: No sound in the corresponding mode.
Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press to store.
*Audio Input menu will not be displayed when "No Audio"is selected.