FUJITSU PDS5004U - Manual (Page 23)

E-20
SELECTING OPTIONS IN A MENU
Use the [MODE] button on the display or and on the remote control to select a desired input mode.
Press .
The main menu screen will appear.
Press or to switch between sub-menus.
Each time you press or , one of the available menus appears.
The corresponding menu screen will appear.
Press or to select an option for adjustment/setup.
A total of five different menus (PICTURE, POSITION/SIZE, AUDIO, FEATURES, FACTORY DEFAULT) are available.
You can easily distinguish between these menus as shown below.
*Press , , or to make adjustment/setup, and press to store.
* Do not change input signals when any of the menus are displayed.
* Audio Input menu will not be displayed when "No Audio" is selected. (See P. E-37.)
USING THE PICTURE MENU
When you finish selecting a desired option in the PICTURE menu screen, press .
At this time, the adjustment/setup screen for that option will appear.
You can use or to change the value for the option. Press to store. (See P. E-26–E-27.)
Changes you make will be stored only for the selected mode.
HOW TO USE MENUS
1
2
3
Ex.: “PICTURE” selected in the main menu
screen
PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode)
PICTURE AUDIO FEATURES FACTORY DEFAULT POSITION/SIZE