Fostex UR-2 - Manual (Page 6)

6
(1) Press the [ SHIFT ] key to turn on the SHIFT mode
followed by the [FILE SEL/ STRG SEL ] key.
The display shows the screen for selecting a
storage device.
In the screen example below, only an SD card is set
to the "SD-1" slot.
(2) Press the [ENTER] key again.
The display now shows the screen for selecting a
folder.
(3) Use the [MENU] dial to select a desired folder and press
the [ENTER] key.
The display shows the Home screen for the first
created audio file in the selected folder.
<Memo>: In the screen example above, "001
BWFF" is the BWFF folder created automatically
when you perform recording with the storage
device, while "002 UR2_1" and "003 UR2_2" are
folders manually created.
Folders created from a personal computer are
also shown ("004 PC-1" and "005 PC-2" in the
example below).
<Note>: If no audio file exists in the selected
folder, the display shows as below.
<Memo>: When more than one storage device is
set to the unit and you want to select a desired
folder that is not on the current storage device,
execute the similar procedure as above.
You also need to select a folder when you edit a
file name or delete an audio file.
Editing a folder name
You can edit a name of a folder in the current storage
device.
<Note>: To edit a name of a folder, the folder must
be in the current storage device.
Select a storage device and then select a folder be-
fore executing the following procedure.
Note that you can also edit a folder name from your
personal computer.
(1) While the unit is stopped, press the [ENTER] key to
enter the MENU mode.
When you first enter the MENU mode, the
following screen is shown.
(2) Use the [MENU] dial to highlight "STORAGE UTILITY"
and press the [ENTER] key.
The display now shows the menu items of the
STORAGE UTILITY menu.
(3) Use the [MENU] dial to highlight "Edit folder name" (newly
added) and press the [ENTER] key.
The display shows the screen for editing the folder
name of the current folder.
(4) Edit the folder name.
See page 4 for details about how to edit a folder
name.
(5) After editing the folder name, press the [ENTER] key to
confirm the name.
The display returns to the Home screen that was
shown before the unit entered the MENU mode.
<Memo>: To check the current folder, press the
[FILE SEL] key while the Home screen is shown.
The current folder
is shown here.
Flashing