Fostex UR-2 - Manual (Page 9)

9
(4) After entering the name, press the [ENTER] key.
The display now shows the confirmation screen for
saving the chain play list.
<Note>: If you want to change the name, press
the [ENTER] key while "EXIT" is highlighted.
The display returns to the previous screen for
name entry.
(5) Use the [MENU] dial or [ ] key to highlight "EXECUTE"
and press the [ENTER] key.
"COMPLETED!" is briefly shown and saving is
completed. The display returns to the Home screen
that was shown before the unit entered the MENU
mode.
<Note>: If a chain play list with the same name
exists in the same folder, the following screen
appears after you press the [ENTER] key.
To overwrite the existing chain play list, high-
light "EXECUTE" and press the [ENTER] key.
If you do not want to overwrite the existing chain
play list, press the [ENTER] key while "EXIT" is
highlighted and rename the list name and save
the list.
<Memo>: You can check the chain play lists you
saved by executing steps (1) and (2) of the "Load-
ing a chain play list" described below.
You can load a chain play list you have saved.
Loading a chain play list
<Note>: You can load any chain play list in the cur-
rent folder.
(1) While the unit is stopped, press the [ENTER] key to
enter the MENU mode.
When you first enter the MENU mode, the
following screen is shown.
(2) Use the [MENU] dial to highlight "CHAIN LIST LOAD"
and press the [ENTER] key.
The display now shows the screen for selecting a
chain play list. On the example screen below, only
one chain play list is available.
<Memo>: On the example screen below, three
chain play lists are saved in the current folder.
(3) Use the [MENU] dial to select a desired chain play list to
be loaded and press the [ENTER] key.
The display shows the warning message as below.
To cancel loading, press the [ENTER] key while
"EXIT" is highlighted.
(4) Use the [MENU] dial or [ ] key to highlight "EXECUTE"
and press the [ENTER] key.
"COMPLETED!" is briefly shown and loading is
completed.
The display returns to the Home screen that was
shown before the unit entered the MENU mode.