Fisher-Price B8865 - Manual (Page 6)

6
Assembly
Pull Up
• Pull up on the seat back tube to be sure it is secure. If you can
remove either end of the seat back tube, you have not assembled
it correctly. Remove the screws and retainers. Re-read and repeat
Assembly step 3.
• Fit the pad upper pocket onto the seat back tube.
• Fit the pad lower pocket onto the footrest.
4
5
• Fit the toy bar ends into the sockets in the footrest.
Hint: The square end of the toy bar fits into the square socket and
the circular end of the toy bar fits into the circular socket.
• Make sure the toy bar latches are secure. The small tabs on the
sockets should be visible in the opening in the latches.
Tab
Latch
Remove the Toy Bar
• Pull the ends of the latches and lift the toy bar.
Latch
6
7