FARGO electronic C30 User Manual

Page 108

Advertising

RESTRICTED USE ONLY

Fargo Electronics, Inc.

Persona C30 Card Printer User Guide (Rev. 2.2)

5-1

Section 5: Printer Adjustments

See this section for printer adjustments.

Table of Contents

Section 5: Printer Adjustments _______________________________________________ 5-1

Table of Contents ___________________________________________________________________ 5-1

Safety Messages (review carefully)______________________________________________________ 5-4

C30 Print Driver Options _____________________________________________________________ 5-5

Reviewing C30 Printer Drivers ______________________________________________________ 5-5

Using the Card tab (Persona C30) _______________________________________________________ 5-6

Adjusting the Card Size Option ______________________________________________________ 5-6

Adjusting the Orientation Option _____________________________________________________ 5-7

Selecting the number of copies_______________________________________________________ 5-8

Using the Diagnostics button under the Card tab _________________________________________ 5-9

Using the Clean Printer Option______________________________________________________ 5-10

Using the Clean Printer Option (continued)__________________________________________ 5-11

Using the Test Print button _________________________________________________________ 5-12

Using the About button____________________________________________________________ 5-13

Using the Device Options tab (C30) ____________________________________________________ 5-14

Reviewing the Device Options tab ___________________________________________________ 5-14

Adjusting the Ribbon Type option ___________________________________________________ 5-15

Selecting the Auto Ribbon Select option ______________________________________________ 5-16

Using the new Printer Driver (Version 2.1.5)___________________________________________ 5-17

Changing the Color Profile Selection for the C30 _______________________________________ 5-18

Adjusting the Color Matching option _________________________________________________ 5-20

Adjusting for the Resin Dither ______________________________________________________ 5-21

Using the Print Both Sides option____________________________________________________ 5-22

Using the Split 1 Set of Ribbon Panels option __________________________________________ 5-23

Using the Print Back Side First option ________________________________________________ 5-24

Using the Print Back Side Only option________________________________________________ 5-25

Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options ____________________ 5-26

Using the Disable Printing option____________________________________________________ 5-27

Using the Image Color tab (C30) ______________________________________________________ 5-28

Using the Resin Heat (K) option (Front and Back) ______________________________________ 5-29

Using the Overlay Heat (O) option___________________________________________________ 5-30

Using the Color Matching option and Default button_____________________________________ 5-31

Using the Calibrate tab (Persona C30) __________________________________________________ 5-32

Using the Image Position Controls ___________________________________________________ 5-33

Using the Image Position Controls (continued) _______________________________________ 5-34

Using the Sensors button __________________________________________________________ 5-35

Using the Settings button __________________________________________________________ 5-36

Using the Magnetic Encoding tab (Persona C30) __________________________________________ 5-37

Using the Magnetic Track Selection radio buttons_______________________________________ 5-38

Using the Magnetic Track Selection radio buttons (continued)___________________________ 5-39

Using the Magnetic Track Options radio buttons ________________________________________ 5-40

Using the Bit Density radio buttons __________________________________________________ 5-41

Using the Character Size radio buttons________________________________________________ 5-42

Reviewing the Enable MLE Support checkbox _________________________________________ 5-43

Using the ASCII Offset radio buttons_________________________________________________ 5-44

Using the LRC Generation radio buttons ______________________________________________ 5-45

Using the Character Parity radio buttons ______________________________________________ 5-45

Using the Shift Data Left checkbox __________________________________________________ 5-46

Advertising

Popular Brands

Popular manuals