FARGO electronic C30 - Manual (Page 38)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 3-12
Flipper Table Module Installation
Additional, related links are provided below:

See the Flipper Table Module Assembly Problems procedures.

See the Print Both Sides option in the Using the Device Options tab (C30) section.

See the Front and Back radio buttons in the Using the Overlay / Print Area tab (Persona
C30) section.

See the Front and Back radio buttons in the Using the K Panel Resin tab (C30) section.
Installing the Flipper Table Module Assembly (D900200)
Step Description
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 Remove the Rear Cover (D90066) to the Printer.