FUJITSU P42XHA58E Series - Manual (Page 11)

E-11
Engli
sh
Deutsch
Esp
a
ñol
Fran
ç
ais
Italiano
Portu
g
u
ê
s
日 本 語
Pус
с
кий
中文
RGB INPUT MODE
1
Press ) to select the input mode.
You can select RGB1.
• RGB1: mD-sub
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-24.
CONVENIENT FUNCTIONS
On-screen information
Press
3
.
The mode is indicated on the screen for 5 seconds.
Picture Mode
Press
4
.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-17)”.
Picture Memory
Press
5
.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
* For the picture memory settings, see “Setting Picture Memory (P. E-17)”.
* You can also use the button
on the display’s control
panel to perform these step
RGB1 mode
Memory1 Memory2 Memory3 Memory4 Memory5 Memory6 Memory7
Memory8
Note
• Functions may not be available with some models and some device options.
7527_E.book 11 ページ ２００６年９月５日 火曜日 午後９時３５分