FUJITSU P42XHA58E Series - Manual (Page 4)

E-4
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
 Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by state
Lit (green): Power ON state
Flashing (red or green): Malfunction (Flashes differently
depending on the type of
malfunction.)
 Remote control signal receiver
Receives signals from the remote control.
 Input mode selector button
 Input mode selector button
Switches between picture input modes.
 Volume + button
 Volume - button
Adjusts the audio volume.
 Wide screen selector button
Switches the screen over to a desired wide screen.
 ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
 Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
DISPLAY SECTION – BACK
Warning
If the power indicator lamp flashes red or green, this signifies that the plasma display has developed a problem. When this happens, be sure to remove
the power plug from the receptacle and contact your dealer. In this circumstance, leaving the plasma display power ON can result in fire or electric
shock.
(Right section)
 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See
P. E-3.)
* See the speaker instruction manual for more information.
7527_E.book 4 ページ ２００６年９月５日 火曜日 午後９時３５分