Fluke HPMS - Manual (Page 135)

5. MAINTENANCE, ADJUSTMENTS AND CALIBRATIONS
Page 125 © 2007 DH Instruments, a Fluke Company
5.7 HPMS ILLUSTRATED PARTS BREAKDOWN
Table 27. HPMS Assembly Illustrated Parts Breakdown (see Figure 21 and 22)
# REQUIRED DESCRIPTION PART NO.
1 HPMS bracket 124142
1 RPM4 mounting bracket, rear 124143
1 RPM4 mounting bracket, side 124155
1 High pressure manaul valve 400902-02
1 Valve nut 122039
1 Valve seat 122034
1 Tube weld assembly 124146
1 Tube weld 124147
1 Tee connector SS-200-3
1 Tube, 248 mm 304-F2-125
1 Tube, 40 mm 304-F2-125
1 Bracket, Relief valve 123118
1 Pressure relief valve 402188
1 DH500 bulkhead 123812-01
1 Foot switch cable assembly (Not Pictured) 402196
1 LED, green 252-122
2 LED, red 252-121
4 Rubber foot pad 2959-405-BLK
1 Adaptor SS-200-R-4
2 DH200 gland 20-2LM4
2 DH200 collar 20-2L4
1 DH500 gland 60-2HM4
1 DH500 collar 60-2H4-316
2 Adaptor 2CM2-316
14 Lockwasher, M4 .40NLOCS
11 Washer, M4 .40NWSAS
12 Nut, M4 .40CNFHS
2 Screw, M3 x 10 .30C100MXFS
4 Screw, M4 x 10 .40C100KCSS