First Alert FA142C - Manual (Page 14)

– 1 4 –
BYPASSING PROTECTION ZONES
Using the
6 BYPASS Key
L I M I T A T I O N
The system will not
allow fire zones to
be bypassed.
All bypasses are removed
when an OFF sequence
(security code plus OFF)
is performed.
This key is used when you want to arm your system with one or more zones intentionally
unprotected. The system must be disarmed first.
1. Enter your security code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). Single
digit zone numbers must be preceded by a zero (e.g. 05, 06).
3. When finished, the keypad will momentarily display a "Bypass" message for each by-
passed zone number. Wait for these zones to be displayed, to confirm their bypass.
4. Arm the system as usual.
Bypassed zones are unprotected and will not cause an alarm if violated
while your system is armed.
TO BYPASS ZONES:
• ENTER CODE.
• PRESS BYPASS KEY.
• ENTER ZONE Nos.
• WAIT FOR BYPASSED ZONES
TO BE DISPLAYED.
• ARM SYSTEM AS USUAL.
TYPICAL MOMENTARY DISPLAYS
OF BYPASSED ZONE
BYPASS 06 FRONT
UPSTAIRS BEDROOM
ALPHA
06
BYPASS
AC
FIXED-WORD
Technical Manuals Online! - http://www.tech-man.com