Trouble conditions – First Alert FA142C User Manual

Page 28

Advertising
background image

2 8

TROUBLE CONDITIONS

Other Trouble Displays

(Continued)

5. AC LOSS is displayed

The system is operating on battery power only due to a

(or NO AC)

power failure.
If only some lights are out on the premises, check circuit
breakers and fuses and reset or replace as necessary.
CALL FOR SERVICE if AC power cannot be restored to
the system.

6. Busy-Standby

(or dI)

If this remains displayed for more than 1 minute, system is
disabled. CALL FOR SERVICE IMMEDIATELY.

7. OPEN CIRCUIT

The keypad is not receiving signals from the control.

(or OC)

8. Long Rng Trbl

If programmed, back-up Long Range Radio communica

(or bF)

tion has failed. CALL FOR SERVICE .

Total Power Failure

If there is no keypad display at all (screen blank), and the READY
indicator is not lit,
operating power (from AC and back-up battery) for the system has
stopped and the system is inoperative. CALL FOR SERVICE IMMEDIATELY.

FOR SERVICING INFORMATION,

SEE PAGE 43

Technical Manuals Online! - http://www.tech-man.com

Advertising