Fujitsu Siemens Computers Rugged Tablet Case - Manual (Page 3)

3
Figure 2. Rugged tablet case - back
Installing the hand strap
The hand strap is designed to let you hold your system
securely when it is installed in the case. Use of the hand strap
is highly recommended.
The hand strap consists of two parts, each of which has a
Velcro strip on one end and a retaining bar at the other. Note
that the longer of the two strips (with the “fuzzy” Velcro)
should be positioned in the top slot, while the shorter strip
(with the “hooks” Velcro) should be inserted in the bottom
slot. To install the hand strap, perform the following proce-
dure:
1. Position the case so that it is face down and the hand
strap slots are facing up. (Figure 2)
Case handle
Hand strap slots
PC Card
access
Rugged Case - Chalice .fm Page 3 Monday, March 19, 2007 10:09 AM