Fujitsu Siemens Computers Rugged Tablet Case - Manual (Page 4)

4
2. Insert the shorter of the two pieces of the hand strap
into the bottom slots with the Velcro “hooks” strip fac-
ing up. (Figure 3) Pull it through until the retaining bar
is snug against the case.
Figure 3. Inserting hand strap halves
3. Insert the longer piece of the hand strap into the top
slot with the “fuzzy” Velcro strip facing down
(Figure 3). Pull it through until the retaining bar is
snug against the case.
Retaining bar
Shorter Velcro strip
(“hooks” facing up)
Longer Velcro
strip (“fuzzy”
side facing
down)
Retaining bar
Rugged Case - Chalice .fm Page 4 Monday, March 19, 2007 10:09 AM