Fujitsu Siemens Computers Rugged Tablet Case - Manual (Page 7)

7
Using the hand strap
When you want to hold the case using the elastic hand strap,
first separate the two halves. Place your hand in a comfort-
able position on the bottom of the system and re-secure the
strap against the back of your hand.
When not using the hand strap, attach it snugly against the
back of the computer.
Installing the handle
To install the handle, perform the following steps:
1. Insert one end of the handle into the D-ring, with the
buckle facing outwards (Figure 7).
Figure 7. Inserting handle strap
2. Bend the end of the handle strap towards the buckle
and tuck it under the edge of the buckle (Figure 8).
3. Pull the strap taut, then insert the end through the sec-
ond edge of the buckle (Figure 9).
4. Pull the end of the strap until it is taut (Figure 10).
D-ring
Buckle
Handle strap
Rugged Case - Chalice .fm Page 7 Monday, March 19, 2007 10:09 AM