Fostex VF80 - Manual (Page 23)

23
About the hard disk storage device
<Normal Screen>
Formatting the Hard disk
Carefully follow the instructions below to newly
format the hard disk properly.
Press the [ENTER/YES] key.
The drive selection display appears.
“
IDE ” will be flashed.
Press the [ENTER/YES] key where the “IDE” is flashed.
The menu to select the format type appears.
“
**** ” represents the name of the drive.
<CAUTION>
Either the “ Standard ” or “ Quick ” format type can
be selected. However, make sure that the
“Standard” format type is selected when
formatting a newly installed hard disk.
Press the [ENTER/YES] key where the “Standard” is
flashed.
The format type selected is set and “ Sure? ” flashes.
Press the [ENTER/YES] key while the [RECORD] key
is depressed.
The formatting process is started. The formatting
process will take some time.
When the formatting is successfully completed,
“
Completed! ” will light up on the display.
Press the [EXIT/NO] key (or [STOP] key) to escape from
the SETUP mode.
The Normal Screen appears indicating the beginning
of the program (P01) that is automatically created after
formatting the hard disk.
Flashing
Flashing
Flashing
1
Turn ON the VF80 after plugging the power cable in the
electric outlet.
The VF80 will startup. “ Unformat! ” will appear on the
LCD. The menu will automatically go to the SETUP
mode.
The display showing the “
Disk Format ” menu appears.
2
3
4
5
6