Finisar FTLF1217P2XTL User Manual
Page 5
FTLF1217P2xTL Pluggable SFP Product Specification – September 2008
© Finisar Corporation September 13, 2008 Rev. B
Page 5
IV. Optical
Characteristics
(T
OP
= -40 to 85
°C, V
CC
= 3. 00 to 3.60 Volts)
Parameter Symbol
Min
Typ
Max
Unit
Ref.
Transmitter
Output Opt. Power
P
OUT
-20 -15
dBm
1
Optical Wavelength
λ
1280
1380 nm
Spectral Width (FWHM)
σ
175
nm
2
Optical Rise/Fall Time
≤ 155 Mb/s
t
r
/ t
f
0.6 3.0 ns
3
Optical Rise/Fall Time = 200 Mb/s
t
r
/ t
f
1.7
ns
4
Systematic Jitter Contribution
TX
Δ
SJ
1.6
ns
5
Contributed Duty Cycle Distortion
TX
Δ
DCD
1.0
ns
6
Data Dependent Jitter Contribution
TX
Δ
DDJ
0.6
ns
6
Random Jitter Contribution @ OC-3
and OC-1
TX
Δ
RJ
0.6
ns
5
Random Jitter Contribution @ FE
TX
Δ
RJ
0.76
ns
6
Extinction Ratio
ER
10
dB
Receiver
Receiver Sensitivity = 51.8 Mb/s RxSENS
-30 dBm
7
Receiver Sensitivity = 155 Mb/s RxSENS
-30 dBm
7
Receiver Sensitivity = 125 Mb/s RxSENS
-31 dBm
7
Receiver Sensitivity = 200 Mb/s RxSENS
-29 dBm
8
Maximum Average Receiver Power
Rx
MAX
-14
dBm
Optical Center Wavelength
λ
C
1270 1600 nm
LOS De-Assert
LOS
D
-33
dBm
LOS Assert
LOS
A
-45
dBm
LOS Hysteresis
1.5
dB
Notes:
1. Measured average power coupled into 62.5/125um fibre with NA = 0.275. Class 1 eye safety per
FDA/CDRH, IEC, and EN60825-1 safety standards.
2. Also specified to fall within the extrapolated curves in FDDI PMD
3
Figure 9, which allow trade-off
between wavelength, spectral width and transmitter rise/fall times.
3. Unfiltered, 10-90%.
4. Unfiltered, 20-80%.
5. Peak-to-peak measurement for OC-3 SR-0 or OC-1 SR-0 operation measured with a PRBS 2^23-1 test
pattern.
6. Peak-to-peak measurement based on 4B/5B encoded Fast Ethernet pattern referenced in FDDI PMD
3
Annex A.5
7. Specifications are for 50 micro-meter or 62.5 micro-meter fiber.
8. Specifications are for 50 micro-meter or 62.5 micro-meter fiber, based on any valid 8B/10B code
pattern and measured at, or extrapolated to, 10
-15
BER.