Friedrich ES15M33 - Manual (Page 25)

25
FRR020
MEASURE DISTANCE “B” TO INSIDE OF THE
CHANNEL ON EACH SIDE.
SUBTRACT 1/8” FROM DIMENSION “B” AND
MEASURE FROM THE EDGE OF THE WING-
BOARD (ITEM 8), MARK, SCORE AND CUT
WITH APPROPRIATE CUTTING TOOL.
CUT HERE AND DISCARD CENTER WASTE
MATERIAL.
WINGBOARD B
B
B
B
FRR019
DIMENSION “A”
CUT
HERE
DISCARD
SHADED AREA
CUT TO FIT DIMENSION “A”
AND BEND DOWN TO FORM
A VERTICAL LEG.
STONE LEDGE
OUTSIDE WALL
A
3/8” SLOPE DOWN
#10-24 SCREW
#10-24 FLAT WELD NUT
Figure 23
Figure 24