FUJITSU ScanSnap Color Image Scanner S510M - Manual (Page 148)

132
6.4 Cleaning the Carrier Sheet
If the Carrier Sheet is used extensively, dirt and dust may stick onto the surface or the interior and
cause scanning errors. Clean it regularly.
<Cleaning method>
Use a dry, soft cloth, or a soft cloth slightly moistened with Cleaner F1 or a mild detergent to
lightly clean off the dirt and dust from the surface and the interior of the Carrier Sheet.
ATTENTION
•
Never use paint thinner or other organic solvents.
•
Do not rub too hard. Otherwise, the Carrier Sheet may be scratched or be
deformed.
•
After cleaning the interior of the Carrier Sheet with Cleaner F1 or a mild deter-
gent, dry the Carrier Sheet completely before closing it.
•
As a guideline, it is recommended to replace the Carrier Sheet every 500
scans.Refer to "7.4 Purchasing the Carrier Sheet" for details on purchasing a
Carrier Sheet.