FUJITSU ScanSnap Color Image Scanner S510M User Manual
Page 88
72
6.
Load the documents onto the paper chute.
ATTENTION
•
Place all documents centering them under the pick roller.
(Documents that are not under the pick roller cannot be fed.)
•
Adjust the side guide to the widest document.
•
Carefully load the smaller documents, which cannot contact the side
guide, so that they can be fed straight. If the documents are skewed
during a scan, the quality of scanned images may be degraded
(chipped images/slant lines produced) or scanned images may be out-
put in different size from the original.
If you have difficulties feeding documents straight, it is recommended to
scan documents in several batches; scan documents of about the same
size in one batch.
Note that smaller documents that cannot be guided by the side guide
may cause a jam.