Furuno Satellite Compass SC-50/110 - Manual (Page 20)

16
1. Fabrication of Signal Cable
The signal cable is fabricated as below. DO NOT hold back the cable shield over
the armor. The installation manual will be revised.
80
80
40
70
70
40
Twist and cut.
Armor
FV1.25-M3
Solder
Grounding wire
Remove coat for clamping.
FV1.25-M3
Armor
Grounding wire
Fig. 2
Solder
Twist and cut.
Vinyl tape Remove coat for clamping.