Follett U155 - Manual (Page 13)

Service
Disassembly instructions for service requirements only – NOT required for
any cleaning procedure.
Dispense wheel motor removal (see drawing above)
1. Remove drain pan, bin access cover and dispense wheel.
2. Remove stainless steel baffle plate under dispense wheel.
3. Remove two screws holding wheel motor bracket on bin.
4. Lift plate and motor up.
5. Unplug electric quick disconnects from motor.
6. Lift motor and mounting plate out front access opening.
12
2
wheel
motor
baffle
plate
wheel motor
mounting plate
dispense whee l
auger tube
auger
a uger motor
(side view)
auger bearing
plate
stationery
agitator
rotating
agitator
front view