Fender SPL-M500 - Manual (Page 8)

DESIGNATION TYPE PR 308
PART NUMBER 071-5000-070 100V
071-5000-000 120V
071-5000-060 230V
071-5000-040 230V (UK)
071-5000-030 240V (AUSTRALIA)
POWER SPECIFICATION 100V version: 100 VAC, 50-60 Hz 900W
120V version: 120 VAC, 60 Hz 900W
230V versions: 230 VAC, 50 Hz 900W
240V versions: 240 VAC, 50 Hz 900W
OUTPUT POWER 200W into 8
Ω
At 1 kHz, 0.20% THD 330W into 4
Ω
500W into 2
Ω
POWER BANDWIDTH 20 Hz to 50 kHz, 500W +0, -3dB into 2
Ω
FREQUENCY RESPONSE 12 Hz to 28 kHz @ +ø, -3dB
SLEW RATE 6.55V / µs
TOTAL HARMONIC DISTORTION <0.2% THD, 20 Hz to 20 kHz at rated power into 2
Ω
DELTACOMP COMPRESSOR RANGE 18 dB
HUM AND NOISE 200µV into 2
Ω
105dB below 500W unweighted
SENSITIVITY (PATCH POINT LEVEL) 1.2V for 500W into 2
Ω
@1kHz
(INPUT LEVEL) 360mV for 500W into 2
Ω
@ 1kHz
NOTCH FILTER BANDS 50 Hz to 500 Hz
400 Hz to 4 kHz
1 kHz to 10 kHz
HIGH PASS FILTER RANGE Corner frequency variable between 12 Hz and 150 Hz
LOW PASS FILTER RANGE Corner frequency variable between 2.5 kHz and 30 kHz
FILTER ALIGNMENT Sub-Bessel
NOTCH FILTER ATTENUATION Better than -20 dB at any selected notch frequency
FILTER SELECTIVITY FACTOR Q = 8
INPUT IMPEDANCE 1/4 in Phone Jack: 21 k
Ω
unbalanced input
32 k
Ω
balanced input
XLR Connector: 27 k
Ω
balanced input
DIMENSIONS Weight 25 lbs. (11.3 kg)
Height 3.5 in. (8.9 cm)
Width 19 in. (48.3 cm)
Depth 12.3 in. (31.2 cm)
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
SPECIFICATIONS