Faria Instruments Performance IS0218 - Manual (Page 3)

COMMERCIAL SPEEDOMETER
Functions available:
1. Odometer display
2. Trip odometer display (resetable)
3. Change the pulses per mile or the
pulses per kilometer input.
A. PPM adjustment can be done
automatically by the microprocessor.
B. PPM numbers can be entered using
the push-button.
C. All features available for both high
and low speed axles.
Detail description
Odometer
The commercial speedometer contains an
odometer to maintain a record of the total
mileage and trip mileage. During normal
operations and after a power on the odometer
display shows;
This display cannot be reset. A quick press
of the push-button changes the display to the
Trip odometer.
Trip Odometer
The Trip odometer allows you to keep
a record of the trip miles or kilometers
independent of the Odometer.
The Trip Odometer is fully user resetable.
While in the Trip Odometer display press
the push-button for 4 seconds and the Trip
odometer is reset to zero.
The pointer travels over a 270-degree dial
to indicate mph (or kph) indicates the speed.
The kph is handled the same as a mph in the
microprocessor. The pulses per mile will be
pulses per kilometer and the self-cal will
be for 1 kilometer instead of 1 mile. There
is no provision to change from miles to
kilometers.
Hour-meter
The speedometer also contains an hour-
meter that is always activated by an external
input so that actual engine hours can be
recorded. Quick press the push-button while
in the Trip Odometer function displays the
Hour-meter.
The last digit on the right blinks up and
down indicating the hour-meter function.
The hour-meter cannot be reset.
Maximum Saved Speed
This speedometer will also record the
maximum speed under normal conditions.
The maximum speed is displayed and
changes as the speed is increased over the
current maximum.
The maximum speed can be reset by pressing
the push-button for 4 seconds.
Another feature of the speedometer is to keep
track of and indicate when a service interval
Page 1