Faria Instruments Performance IS0218 User Manual

Page 4

Advertising
background image

has passed. The interval can be either or both
mileage and hours.

A seven digit display readout displays
the total mileage, the trip mileage, hour-
meter or maximum saved speed (cleared
by pressing and holding the push-button
for 4 seconds while in the maximum speed
display), the menu items are scrolled by
pressing and releasing the push-button on
the speedometer.

If a service interval has been passed the
display will show a service message (one
time only).

Service Hours

Service Distance

Pressing the push-button will return the
display to the primary mileage and hour
displays.

The service interval message will also
show once every time the speedometer is
powered up. The display can be cleared by
the push-button. The pulses per mile output
from the sensor to the speedometer can be
programmed by hand or done automatically,
for both of the high and low range axles.

Setting the speedometer
There are two major speedometer setting
routines.

The first is activated during boot-up. If the

Page 2

push-button is pressed and held on when
power is first turned on the “boot menu” will
be activated.

The second menu, the “run menu”, can be
activated during normal running time by
pressing and holding the push-button for two
seconds.

Boot menu
Pressing and holding the push-button while
power is turned on will activate the “boot
menu”.

The display will show “HELLO” and wait
for you to release the push-button.

When the push-button is released the first
item on the menu will be shown. In four
seconds the microprocessor will activate that
menu feature.

If you want a different item from the menu,
you must press and release the push-button
before four seconds have elapsed. The menu
items will scroll continuously. If you want
to get out at this point with no changes, stop
at the last menu item “donE”, and in four
seconds the microprocessor will return to
normal with nothing being changed.

If you are in a menu, just do nothing for 32
seconds and the microprocessor will restart
and change nothing.

1. The first menu item “SEr HrS” (Service

Advertising