FUJITSU FTP-622DSL001/011/012 - Manual (Page 6)

6
FTP-622DCL/DSL
■ PRINTING COMMANDS (CENTRONICS INTERFACE)
(Continued)
Command Contents
HT Moves the print position to the next tab.
LF Line feed.
FF Feeds forms (new page).
ESC RS Sets reverse printing.
ESC US Resets reverse printing.
ESC ! +n Sets print mode.
ESC* +m+n 1 +n 2 +d 1 ~d N Sets the bit image mode “m” for n1, n2 dot numbers.
ESC 2 Sets 1/6 inch line feed length.
ESC 3 + n Sets the line feed length.
ESC @ Printer initialization.
ESC A+n Sets the space between lines.
ESC C+n Sets the page length by character line.
ESC D+d 1 ~d N +NUL Sets the tab position.
ESC J+n Feeds paper in forward direction.
ESC K+n Feeds paper in reverse direction.
ESC c+1+n Sets the internal processing.
ESC R+n Selects the international character.
ESC s+n Sets the printing speed.
ESC d+n Printing and n-line feeding.
ESC e+n Reverse line feed in “n” lines after printing.
ESC t+n Character code table selection.
ESC {+n Sets/resets the upside down printing.
ECS EM+n Automatic paper feed distance setting.
ESC X+n+m Setting turning time of the motor excitation.
ESC V+n Right Rotation 90
°
specification / cancellation.
FS E+n Correction of impressed energy.
FS ! +n Sets the Kanji print mode* 1 .
FS & Sets Kanji mode* 1 .
ESC %+n Selects the font to download* 3 .
ESC &+y+c1+c2+x+d1~dn Registers the download front* 3 .
ESC ?+n External character registration deletion* 3 .