FUJITSU FTP-622DSL001/011/012 - Manual (Page 7)

7
FTP-622DCL/DSL
Command Contents
FS . Resets Kanji mode* 1 .
FS C+n Selects Kanji code type* 1 .
FS 9+n Sets the detection functions.
FS*+m+n1+n2+d1~dn Prints image data on SRAM* 3 .
FS r+n Notifies of printing finish* 4 .
FS W+n Sets/resets 4 times enlarged character.
GS A+m+n Sets the line feed length after mark detection.
GS E+n Sets print quality.
GS V+n+m Executes paper cutting* 2 .
GS e+n+m Sets the bar width.
GS h+n Sets the barcode height.
GS k+m+n+d 1 ~d N Selects the barcode type and prints.
GS w+n Sets the barcode length.
GS &+m+x+y1+y2+[d]k Registration of image data* 3 .
GS '+m+n Prints registered image data * 3 .
GS a+n Sets and cancels status transmission (valid only for DSL)* 3 .
(Continued)
*1: Only for FTP-622DSL112.
*2: Only for FTP-622DCL011 or FTP-622DSL011/012.
*3: Only for FTP-622DSL012.
*4: Only for FTP-622DSL011/012.
GS < Line feeds to the next mark.