Furuno 1734C User Manual
Page 14
Advertising
6
4. Unfasten four screws to remove the cover. Discard the packing material in the radome.
Remove and discard
the packing material.
Snap holder
Antenna unit, inside view
The mounting base is fitted with a snap holder, which may be used to hang the cover
after removal. Use the hole next to screw hole inside the cover to hang it.
a)
Unfasten the snap assy. with the string attached at the holder in the mounting base.
b)
Unwind the string.
c)
Attach the snap to a screw hole on the inside of the cover.
Note: Do not hang any other objects with the snap.
Advertising