Assembly montaje – Fisher-Price K5502 User Manual

Page 5

Advertising
background image

5

Assembly Montaje

• Insert the ends of the seat back tube (inside the pad) into the

sockets in the front rail. Push down on the seat back tube until
you hear a “click” on each side.

• Pull up on the seat back tube to be sure it is secure.

• Insertar el tubo del respaldo (dentro de la almohadilla) en las

conexiones de la barandilla delantera. Empujar hacia abajo el
tubo del respaldo hasta que se oiga un clic.

• Jalar hacia arriba el tubo del respaldo para verificar que

está seguro.

4

Side Rails
Barandillas laterales

Front Bar
Barra delantera

Hint: You may want to install batteries into the soother before
assembling the front bar to the front rails.
• Position the front bar so that the soother is upright. Fit it to

grooved area on the inside of the front rails.

• Insert four #4 x 20 mm screws into the front rails and tighten.
Hint: You may need the help of another adult to hold the
front bar in place while you insert and fasten the screws.

Atención: instalar las pilas en la unidad relajante antes de
montar la barra delantera en las barandillas delanteras.
• Colocar la barra delantera de modo que la unidad relajante

esté en posición vertical. Ajustarla en el área con ranuras en
el interior de las barandillas delanteras.

• Insertar cuatro pernos n° 4 x 20 mm en las barandillas

delanteras y apretarlos.

Atención: pida la ayuda de otra persona para sujetar la
barra delantera en su lugar mientras inserta y aprieta
los tornillos.

5

Pad
Almohadilla

Seat Back Tube
Tubo del respaldo

Socket
Conexion

Socket
Conexion

Advertising