Foster Gas Oven KS 90 - Manual (Page 9)

Before connecting the appliance to the mains, ensure that:
• The voltage corresponds to the voltage specified on the rating plate
at the bottom of the surround.
• The overload cut-off device and the domestic system can withstand
the load of the appliance (see rating plate).
• The power supply system is provided with an efficient earth
connection and that the socket or omnipolar switch, with minimum
contact opening of 3mm. , is easily accessible once the appliance
has been installed.
• If the plug is not easily accessible, the installation personnel must
provide an omnipolar switch with contact opening distance equal to
or greater than 3 mm.
The power supply cable must be positioned so that it does not at any
point exceed the ambient temperature by 50°C.
The appliance is supplied with cable without plug.
A standardised plug must be used bearing in mind that:
ELECTRICAL CONNECTION
- yellow - green = earth
- blue = neutral
- brown = phase
26