FUNAI 6513DA - Manual (Page 23)

- 23 - EN
0C28
1 Press the FWD g g or REV h h button during
playback. (The sound for DVD is muted.)
• For DVDs, pressing the FWD g or REV h
button cycles the playback speed in three steps.
• For audio CDs, the playback speed is fixed.
2
Press the PLAY button to return to normal
playback speed.
FAST FORWARD/REVERSE
DVD CD
E x2
E x8
E x32
D x8
D x32
D x2
E D REV Button Button FWD
1 Press the FWD g g button while playback is
paused. (Sound remains muted.)
• Slow motion mode will be activated.
• Pressing the FWD g button cycles the playback
speed in three steps. Select an appropriate speed
while referring to the speed indication on the
screen.
2 Press the PLAY button to return to normal
playback speed.
NOTES:
• Slow playback is not available with audio CDs.
• The reverse of slow playback is not available.
SLOW MOTION
DVD
1/16
1/8
1/2
D Button FWD
1
Press the number buttons to enter the desired
track number.
• The selected track will be located, and playback
will start.
You can also press the SEARCH MODE button, use
the number or K/L buttons to enter the track number,
and then press the PLAY button.
Pressing the SEARCH MODE but-
ton during playback causes the cur-
rent track number to be displayed in
square brackets.
SEARCH/TRACK
TOTAL TRACKS: 07
TRACK [ 6 ]
Start Exit
_
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP button G is pressed during playback
or while playback is paused, the current track is
skipped and the next track is played. When the
SKIP button H is pressed once, the top of the cur-
rent track is located for replaying. When the SKIP
button H is pressed again while playback is
paused, the previous track is located. Each time the
SKIP button H is pressed while playback is
paused, the disc is searched backward track by
track. Once playback has started, pressing the SKIP
button H locates the top of the current track.
STARTING FROM A DESIRED
TIME COUNT
DVD CD
1 Press the SEARCH MODE
button.
• Press the button three times for
DVDs or two times for audio
CDs.
2
Press the number buttons to set the desired
time count.
• Example: 1 hour, 23 minutes and
30 seconds
1
→
+10
→
+10
→
3
→
+10
→
+10
→
+10
→
0
• To enter 0 (zero), press the num-
ber 0 (zero) button or press the B button.
3 Press the PLAY button. Playback will then
start from the set time count.
NOTES:
• Playback from a desired time count is not available
with some discs.
• Specific time playback is not available with some
discs or if the unit is in stop mode.
STARTING FROM A DESIRED
TRACK
CD
SEARCH/TIME
TOTAL TIME 1h23m45s
TIME [ _h__m__s ]
Start Exit
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h23m30s]
Start Exit
_