FUNAI 6513DA - Manual (Page 26)

SETTINGS
- 26 - EN
0C28
The TV/DVD has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then
press the
K K / L L buttons to select the desired audio
language.
• The audio language can be changed if multiple lan-
guages are recorded on the DVD being played.
For audio CDs
Press the AUDIO button during playback.
• Pressing the K/L buttons cycles the sound mode
through STEREO, L-CH and R-CH.
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
DVD CD
NOTES:
• Pressing the K/L buttons may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to
the manual accompanying the disc.
• If a desired language is not shown after pressing
the K/L buttons several times, the disc does not
have an audio source in that language.
• The audio language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that lan-
guage is not available on a disc, a language defined
by the disc is selected.
• The screen display will disappear after about 15
seconds.
• If you use DIGITAL AUDIO OUT jack, the sound
mode of audio CDs can not be changed.
AUDIO 1 : E N G / 8
AUDIO 2 : F R E / 8
AUDIO 8 : J P N / 8
HELLO Bon jour
Only the right channel is active.
AUDIO R - C H
Both right and left channels
are active (stereo).
AUDIO S T E R E O
Only the left channel is active.
AUDIO L - C H