FujiFilm 120 - Manual (Page 14)

14
2. USING YOUR CAMERA
LOADING THE CAMERA
Almost all 35mm films that your camera uses will have a DX coding symbol on the
film box and on the film cassette itself. Information you will see includes:
A : Number of Exposures
B : DX Code symbol
C : Film Speed (sensitivity to light or ISO rating)
• If non-DX coded film is used, the camera’s automatic exposure system automatically sets itself
to ISO 100.
• Always load and remove film from your camera away from direct sunlight.
1 Check the film check window to make sure no film is loaded into the camera.
2 Slide the camera back lock in the direction indicated by the arrow.
3 To open the back, slide the lock in the direction indicated by the arrow.
∗
Insert battery before loading film.
∗
Never open the camera back while film is in your camera.
∗
Never apply excessive force when opening or closing the camera back.
1
B
A
C
3
2
1