Fisher-Price Barbie Ford Mustang L6349 - Manual (Page 12)

14
1
L6349pr-0920
• Locate the simulated
radio on the dash.
• Loosen two screws on
the underside of the dash to remove the simulated radio. Set the
screws aside.
• Remove the simulated radio from the dash.
• Loosen the screw in the battery compartment door. Remove the
battery compartment door.
• Insert three “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
• Replace the simulated radio in the opening in the dash.
• Insert the two screws back into the underside of the dash and tighten
to secure the simulated radio.
• When sounds from the simulated radio become faint or stop, it’s time
for an adult to change the batteries!
15
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause
a chemical burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely. Do
not dispose of product in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
1.5V x 3
"AA" (LR6)
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority
for recycling advice and facilities (Europe only).
Battery Compartment Door Battery Compartment Door
ASSEMBLY F
DASH VIEW
19
19 19
19
9
21 22
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations. For best results,
avoid repositioning a label once it has been applied to the vehicle.
18