Fisher-Price Barbie Ford Mustang L6349 - Manual (Page 13)

19
18
ASSEMBLY F
L6349pr-0920
• Fit the tabs on the rear deck into the slots in the back end of
the vehicle.
• Insert two #8 x 3 /
4
" screws into the rear deck. Tighten the screws.
17
• Fit the long tabs on the hood into the slots in the front end of
the vehicle.
• Pull the hood forward and lower.
Note: The hood is held down by magnets. Simply lift to open the
hood. Do not use around items that are sensitive to or affected by
magnetic fields.
16
Hood
Note: The seat is adjustable and has three positions. You can move
the seat back as your child grows.
• Insert both tabs on the front edge of the seat into one of the sets of
slots inside the vehicle.
• Choose the slots closest to the dash for shorter drivers and the slots
furthest from the dash for taller drivers.
Rear Deck
Short Seat Belts
Long Seat Belt
• Insert the fastener end of a short seat belt strap through the slot
near the outer edge of the seat. Make sure the side of the seat belt
with the fastener faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot until the
last T-loop at the opposite end of the belt catches against the slot.
You will pull one T-loop through the slot.
• Repeat this procedure to assemble the other short seat belt strap.
• Insert each fastener end of the long seat belt strap through each
slot in the center of the seat. Make sure the fasteners face the outer
edge of the seat.
• Pull each side of the long seat belt strap evenly through the slots.
Make sure to pull each T-loop through a slot.
Slots
FRONT VIEW
BACK VIEW
Seat
TOP VIEW
1