Fisher-Price Barbie Ford Mustang L6349 - Manual (Page 21)

L6349pr-0920
1
VEHICLE OPERATION
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts from
the pedal. Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
IMPORTANT! Use this vehicle ONLY outdoors. Most interior floor-
ing can be damaged by riding this vehicle indoors. Fisher-Price ®
will not be responsible for damage to the floor if the vehicle is
used indoors.
To Back Up
• Make sure the shifter is in the low speed position.
• Press down on the foot pedal. The vehicle goes forward at a
maximum of 2 1 /
2
mph (4 km/h). Help your child practice steering
to learn how far and how quickly to turn the steering wheel when
driving forward in low speed.
Beginner Use - Low Speed Drive
IMPORTANT! To avoid damaging the motors and gears, stop the
vehicle before shifting from forward to reverse R .
• Once your child is completely comfortable with operating the vehicle
in the forward mode, introduce reverse R .
• Make sure the shifter is in the reverse R position.
• Press down on the foot pedal.The vehicle will go in reverse at a
maximum of 2 1 /
2
mph (4 km/h). The vehicle is designed to operate
in low speed only in reverse. Help your child practice steering to
learn how far and how quickly to turn the steering wheel when
driving in reverse.
• Make sure the shifter is in the high speed position.
• Press down on the foot pedal. The vehicle goes forward at a maximum
of 5 mph (8 km/h). Help your child practice steering to learn how far
and how quickly to turn the steering wheel when driving forward in
high speed.
Advanced Use - High Speed Drive
• Before you disconnect the high speed lock-out, make sure your child
knows how to steer, how to start and stop the vehicle and knows the
rules for safe driving. When the high speed lock-out is disconnected, the
vehicle can be driven forward in low speed (2 1 /
2
mph / 4 km/h maximum)
or high speed (5 mph / 8 km/h maximum).
• Make sure the shifter is in the low speed position.
• Loosen and remove the screw in the shifter box.
• Place the lock-out screw into the hole in the top of the engine for future
use. It can be re-inserted into the shifter box to lock-out high speed.
Remove
lock-out screw
for high speed.
L
Place
lock-out screw
here for storage.
As assembled, your vehicle is ready to roll in low speed (2 1 /
2
mph, maximum). After your child has mastered the basic skills of driving and
understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. See
the instructions on this page to remove the high speed lock-out screw.
STOP