Furuno LCD DISPLAY MU-155C - Manual (Page 15)

8
Menu item Function Setting range
H_SIZE*** Adjusts the image size horizontally.
V_SIZE*** Adjusts the image size vertically.
Variable depending on
signal type
PHASE Adjusts the characters and graphic lines. 1-32
CONTRAST Increases or decrease contrast level. 1-64
H_POSITION Moves the image position horizontally. 1-50 (DVI), 1-99 (RGB1, 2)
V_POSITION Moves the image position vertically. 1-40
R_LEVEL Adjusts red color level. 1-64
G_LEVEL Adjusts green color level. 1-64
B_LEVEL Adjusts blue color level. 1-64
TEMPERATURE Adjusts color temperature. 5500K/6500K/7000K/8000K *
B STRETCH Reduces noise on black color. OFF, 1-10
W STRETCH Emphasizes white color. OFF, 1-10
DISP MODE
Selects the signal resolution.
FULL:
Shows the input signal on entire screen.
EVEN:
Shows the input signal with original size.
NORMAL: Shows the input signal with same
aspect ratio.
FULL/EVEN/NORMAL**
SHARPNESS Sharpens the edge horizontally. 1-10
*: Warm color← 5500K, 6500K, 7000K, 8000K → Cold color
**: Select NORMAL to use the SXGA signal from a radar or scanning sonar. Note that both left
and right edges may be in black. For VGA and XGA signals, FULL and NORMAL are
available.
***: Adjust H_SIZE and V_SIZE properly. Otherwise, unwanted image may appear outside of the
display area.
Note:
When the characters are not clear, adjust PHASE and SHARPNESS.